Sony P910a To end a call, To handle an incoming call, To make a call using Speed dial, To make a call using the Call list, To make a call using voice control

This is the Internet version of the user’s guide. © Print only for private use.

If a call is not successfully connected, the P910a can be set to automatically retry to connect the call. When a retry is successful, the P910a alerts you with a single ring signal.

2.	Select an entry by rotating the Jog Dial and pressing it
	inwards.
3.	Select a phone number by rotating the Jog Dial.

To make a call using Speed dial

Speed dial is a fast way to call one of your special numbers. See ‘Set up speed dial numbers’ on page 48. This is the default phone view.

1.Select on the button bar.

2.Use the Jog Dial or tap with the stylus to select an entry.

To make a call using the Call list

PhoneChat Edit

Sony Ericsson

1 2 3

John Sandra Susan(w)

4 5 6

Mike Julia(h) Robert

7 8 9

Elizabeth Empty Empty

4. Press the Jog Dial inwards.

You can also tap the contact and/or number using the stylus.

To make a call using voice control

You use the voice control in the same way as with the flip closed. See“To make a call using voice control” on page 41.

To end a call

Select End call, or press the Jog Dial.

Incoming calls

When you receive a call, if the calling party is found in Contacts, the name of the caller will be displayed. If there is a picture, it will also be shown in a small or large version. See

1. Select from the button bar.

2.Select an entry by rotating the Jog Dial and pressing it inwards. You can also tap the entry using the stylus.

3.Select .

To make a call using the Contact list

1. Select in the application picker.

‘Incoming call picture’ on page 52.

To handle an incoming call

Use the screen buttons to select what to do.

•Answer – Answer the call.

•Send Busy – Reject the call. The calling party will hear a busy tone and the call will be logged as a rejected call.

Phone 44