VAIO® Notebook Quick Start
My notebook starts, but my system doesn’t start properly.
❑When the internal backup battery is low on power, it may not start your system properly. The message “Press <F1> to resume, <F2> to setup” appears at the bottom of the screen. Follow these steps:
1 Press F2. The BIOS Setup menu appears.
2 Set the date (month/day/year). Press Enter.
3Press to select System Time, then set the time (hour: minute: second). Press Enter.
4 Press to select Exit, then press to select Get Default Values. The message “Load default configuration now?” appears.
5Select Yes and press Enter.
6Select Exit (Save Changes), and then press Enter. The message “Save Configuration changes and exit now?” appears.
7Select Yes, then press Enter. The notebook restarts.
My notebook starts, but the message “Operating system not found” appears and Windows does not start.
❑Make sure there is no diskette in the floppy disk drive
❑If a
1 Turn off the notebook, and then remove the diskette.
2 Restart the notebook and confirm that Windows starts properly.
❑If Windows still does not start, follow the steps below to initialize the BIOS: 1 Remove any diskette from the floppy disk drive.
2 Turn off the notebook.
3 Remove any peripheral devices connected to the notebook.
4 Turn on the notebook.
5 Press the F2 key when the Sony logo appears. The BIOS setup menu screen appears.
6 Press the directional arrow keys to select the Exit menu.
52
