Limitation (wrong connection example)
Do not connect this drive to two computer as shown below.
i.LINK cable
Peripheral cable
Disconnecting the drive from the computer
With the Windows XP operating system, no special procedures are needed to disconnect the drive. Simply make sure that no application programs are active and that the drive’s BUSY indicator is not on, and then disconnect the peripheral cable or i.LINK cable.
Notes
•Before disconnecting the drive, close any running software.
•When a Digital Video Camera Recorder is connected to the drive, disconnect the i.LINK cable from the Digital Video Camera Recorder before turning off the Digital Video Camera Recorder.
zHint
To use the drive again after disconnecting the peripheral cable or i.LINK cable, perform the steps described in the section “Connecting the Drive” on page 12. The drive will be detected automatically by your Windows operating system.