Operations Using the Optional Remote
The Optional Remote RM-D750
You can do the following operations using serial remote control with an optional remote
Note
Set REMOTE on the front panel to WIRED when the remote is connected to the deck. When using it remotely, set REMOTE to WIRELESS.
Checking the track order
You can check the order of tracks in your program by pressing the RMS CHECK button. Each time you press the RMS CHECK button, the track numbers appear in the order they were programmed.
Note
You cannot use the CLEAR button to cancel a programmed track while checking the track order.
To add a track to a program
Repeat steps 1 and 2 while the deck is stopped.
Note
You cannot add a track to a program after RMS Play has started.
Playing tracks in the order you want (RMS* Play)
RMS Play allows you to specify the playback order of the tracks on the tape to create your own programs containing up to 60 tracks (using program numbers 1 to 99). To use RMS Play, however, you must first record start IDs and program numbers on the tape.
To cancel an entire program
Press p repeatedly until “RMS” disappears.
Locating a track by scanning each track (Music Scan)
You can locate a track by scanning the first 8 seconds of each track.
Number buttons
CLEAR
á
OPEN/ |
| COUNTER |
|
CLOSE | MODE RESET | ||
6
START ID
AUTO RENUMBER WRITE REHEARSAL ERASE
LOCATE MARK
1 2 3
4 5 6
RMS
CHECK ENTER
7 8 9
0MARGIN
CLEAR | M.SCAN | REPEAT | RESET |
DATE |
| END ID |
|
RECORDED PRESENT | WRITE | REHEARSAL | ERASE |
SKIP |
| SKIP ID |
|
PLAY | WRITE | REHEARSAL | ERASE |
á P p
AMS
=+ R r
INPUT
FADER MONITOR
0 )
RMS
ENTER
RMS CHECK
p
OPEN/ |
| COUNTER |
|
CLOSE | MODE RESET | ||
6
START ID
AUTO RENUMBER WRITE REHEARSAL ERASE
LOCATE MARK
1 2 3
4 5 6
RMS
CHECK ENTER
7 8 9
0MARGIN
CLEAR |
| M.SCAN | REPEAT | RESET |
DATE |
| END ID | M.SCAN | |
RECORDED | PRESENT | WRITE | REHEARSAL | ERASE |
| SKIP |
| SKIP ID |
|
| PLAY | WRITE | REHEARSAL | ERASE |
á | á |
| P | p |
AMS
=+ R r
INPUT
FADER MONITOR
0)
1Enter the program number (1 to 99) of the track you want to play.
If you‘ve entered the wrong number
Press CLEAR, then enter the correct number.
2Press RMS ENTER.
RMS
ST EP 1
5
Playing Program order number
3Repeat steps 1 and 2.
4Press á.
The deck starts playing the programmed tracks in sequence.
26EN * RMS = Random Music Sensor
1Press M.SCAN while the deck is stopped.
2Press á.
The deck plays the first 8 seconds of each track in succession.
3When you find the track you want, press M.SCAN.
The track continues playing.
zYou can use Music Scan while playing a track
If you press the M.SCAN button while playing a track, the deck will rewind the tape to its beginning, then play the first 8 seconds of each track on the tape in succession.
