Sony PCS-1/1P manual 208

Message	Meaning
LAN configuration error. Connection is not	Check the TCP and UDP port numbers in the LAN
complete as an invalid port number is	Setup menu.
specified.
Line is busy. Try to dial again later.	Connection has filed as the line is busy. Try to dial
	again later.
Local number is not set correctly in the	ISDN line has been connected with 1B (64K)
ISDN Setup menu. Set it correctly. Line	channel. Set the local numbers correctly in the
connected with 1B (64K).	ISDN Setup menu.
Local number setting for ISDN	ISDN line has been connected with 1B (64K)
configuration may not be correct in the	channel. The local numbers may not be correctly
remote party. Line connected with 1B (64K).	set in the remote party.
H.221 negotiation timeout. Restart the	Turn off your system, turn it on and try to dial
system and connect again.	again.
Dialing the same address is invalid.	You are calling the same party.
The ISDN lines fully occupied. Check	Check the number of ISDN lines is correctly set in
Number of Lines in the Multipoint Setup	the Multipoint Setup menu, or check the ISDN
menu, or check whether the ISDN cable is	cable connection.
disconnected.
Regarded as a secondary terminal as the	Some functions may be limited as your system is
number of lines for ISDN configuration is	regarded as secondary terminal.
different.
Regarded as a secondary terminal as Far End	Some functions may be limited as your system is
Camera Control is set to Off.	regarded as secondary terminal.
Check the line interface or the IP address is	Select the line interface correctly or enter the
set correctly.	correct IP address.
Dial setup error. No prefix number is	The prefix is not registered in the Dial Setup menu.
entered.
Dial setup error. No prefix number for LAN	The prefix is not registered in the Dial Setup menu.
is entered.
LAN configuration error. PPPoE is set to	PPPoE is set for LAN connection. Configuration of
On. Check the PPPoE User Name and	the user name and password is required.
Password.
LAN configuration error. IP Precedence	Set the IP Precedence value between 0 and 7 in the
exceeds the maximum value.	LAN Setup menu.
LAN configuration error. Diffserve exceeds	Set the Diffserve value between 0 and 64 in the
the maximum value.	LAN Setup menu.
Connection using SIP is not available.	Connection using SIP cannot be made as the SIP
Parameter error.	configuration is not correct. Check the settings in
	the SIP Setup menu.
Connection using SIP is not available.	Connection using SIP cannot be made as this
System call error.	System has a problem.
Connection using SIP is not available.	Connection using SIP cannot be made as the
Memory over.	memory of this system is fully occupied.

208 On Screen Messages