Sony PCS-1/1P To call the second and other remote parties

To register a normal phone, enter the telephone number with “T” at the beginning. (e.g., T0312345678)

Dial

A	IP	Line I/F
B	IP	IP&ISDN
		LAN Bandwidth
C	IP
		1024 Kbps
D	IP	Number of Lines
E	IP	6 B (384K)
More Options	Dial	Save

For details on the setups, see step 3 in “To call a remote party not registered in the Phone Book” on page 74.

4 Select “Dial”, and press the PUSH ENTER button on the Remote Commander. You can also press the CONNECT/DISCONNECT ( / ) button on the Remote Commander.

The system begins dialing the numbers selected in step 3. “ Dialing (IP)”,

“ Dialing (ISDN)” or “ Dialing (IP & ISDN)” appears on the monitor screen, and the ON LINE indicator (blue) on the Communication Terminal blinks.

When the system connects to all the remote parties, the message “Meeting starts!” appears on the screen, and the ON LINE indicator stops blinking and lights.

To call the second and other remote parties

After starting communication with the remote party selected first, press the CONNECT/DISCONNECT ( / ) button on the Remote Commander to open the submenu.

Disconnect Phone Book

Dial

Cancel

You can connect the second and other remote parties one by one, using the same procedures as those for a point-to-point conference.

Select “Phone Book” from the submenu, then perform steps 2 and 3 of the procedure in “To call a remote party registered in the Phone Book” on page 78. Or, select “Dial”, then perform steps 2 to 4 of the procedure in “To call a remote party not registered in the Phone Book” on page 74.

Videoconference Multipoint 8: Chapter

Starting a Multipoint Videoconference 171