Sending Motion Pictures Input from an External Camera or Other Equipment as Still Images

During communication a motion picture output from an external camera or VCR connected to the Communication Terminal can be frozen, and then sent to the remote party.

External camera, VCR, etc.

AUDIO OUT

AUX1–VIDEO IN–AUX2

AUDIO IN

CAMERA UNIT

MIC

XXXX

WHITE

 

 

 

 

 

(PLUG IN POWER)

 

BOARD

 

 

 

 

 

1

2

 

(MIXED)

VIDEO OUT

 

 

 

100BASE-TX

 

 

DC 19.5V

 

 

 

 

 

 

AUX

MAIN– MONITOR– SUB

OUT

 

10BASE-T

XXXXXX

 

 

 

 

 

 

 

IR OUT

 

 

 

 

 

 

 

1

2

 

 

 

to video output

to S-video

to VIDEO IN

to VIDEO IN

output

AUX1

AUX2

 

S-video connecting cable (not supplied)

Video connecting cable (not supplied)

To send a still image

1 Open the Still Image menu.

Press the MENU button on the Remote Commander to display the Setup menu,

then select the (still image) icon with the V or v button.

2 Display the picture you want to send on the monitor screen.

Press the VIDEO INPUT SELECT button on the Remote Commander to display the Video Input Select menu, then select the input from which you want to send a picture under “Near”, and press the PUSH ENTER button.

AUX 1: Selects the picture input from equipment connected to the VIDEO IN AUX 1 connector.

AUX 2: Selects the picture input from equipment connected to the VIDEO IN AUX 2 connector.

Notes

•Selecting “Object” enables you to display the picture input from the optional PCS-DS150/DS150P Document Stand on the monitor screen.

•If you change the label of the video input using the Custom Input Label menu in Page 4 of the General Setup menu, the labeled name is displayed instead of “AUX1”, “AUX2” or “Object”.

3 Use the V, v, B or b button on the Remote Commander to select “Send”, then press the PUSH ENTER button.

The motion picture on the monitor screen freezes, and a still picture is sent to the remote party. The still picture remains even after sending.

To cancel the still image display on the answering site

Select “Clear”, or switch the input picture.

Equipment Optional With Videoconference 4: Chapter

Sending Motion Pictures as Still Images 109