Starting a Multipoint Videoconference
Calling Remote Parties
To call remote parties registered in the multipoint connection lists1 Select the multipoint connection list registered in the Phone Book.
The multipoint connection lists are marked with “ IP”, “ ISDN” or “ IP & ISDN”.
2 Press the CONNECT/DISCONNECT ( / ) button on the Remote Commander, or press the PUSH ENTER button to display the submenu, press the V or v button to select “ Dial”, then press the PUSH ENTER button.
Phone Book
RECENT
IP
TOKYO Bob John
IP | ISDN | IP |
OSAKA | NEWYORK | MULTI LIST |
TOKYO |
|
|
0.0.0.0 |
|
|
Recent
Dial
Edit
Copy
Delete
The system begins dialing the numbers of the remote parties registered in the multipoint connection list. “ Dialing (IP)”, “ Dialing (ISDN)” or “Dialing ( IP & ISDN)” appears on the monitor screen, and the ON LINE indicator (blue) on the Communication Terminal blinks.
When the system connects to all the remote points, the message “Meeting starts!” appears on the screen, and the ON LINE indicator stops blinking and lights.
To call remote parties by selecting from the Phone Book1 Select a remote party to which you want to connect for a multipoint videoconference from the Phone Book.
168 Starting a Multipoint Videoconference