The chair control is activated and you can control up to 99 terminals. The chair control feature is canceled if you set “Broadcast Mode” to “Chair Release”.

Note

When you operate incorrectly, the message “MCU operation rejected.” will appear on the monitor screen.

Displaying the picture of the selected terminal

1 Open the Display Control menu.

2 Use the V, v, B or b button to select “Receive” under “Broadcast Mode”.

3 Use the V, v, B or b button to select the number of the terminal you want to view in the box under “Terminal”, then press the PUSH ENTER button.

The picture of the selected terminal is displayed on the local screen.

Notes

•When no terminal is selected, the picture of the smallest terminal number will be displayed.

•The terminal number is assigned to a terminal based on the information on each terminal obtained from the MCU.

To broadcast the selected picture to all terminals

1 Open the Display Control menu.

2 Use the V, v, B or b button to select “Broadcast” under “Broadcast Mode”.

3 Use the V, v, B or b button to select the number of the terminal you want to broadcast in the box under “Terminal”, then press the PUSH ENTER button.

The picture of the selected terminal is displayed on the local screen and is broadcast to all terminals.

To broadcast a local picture to all terminals

1 Open the Display Control menu.

2 Use the V, v, B or b button to select “Broadcast” under “Broadcast Mode”.

3 Use the V, v, B or b button to display “0” in the box under “Terminal”, then press the PUSH ENTER button.

The local picture is broadcast to all terminals. The indicator is shown on the monitor screen.

Videoconference Multipoint 8: Chapter

Connecting the External MCU 181