4 Use the V, v, B or b button on the Remote Commander to select “Next”, then press the PUSH ENTER button.
The ISDN Setup Wizard appears when the
When the ISDN Unit is not connected, the LAN Setup Wizard is displayed. Proceed to step 11.
5 Set the following items on the ISDN line.
ISDN Setup Wizard
Country/Region | USA |
|
Country/Region Code | 1 |
|
Protocol | National ISDN |
|
Previous | Next | Cancel |
Country/Region: Select your country or region.
Country/Region Code: Enter your country code or region code with the number buttons on the Remote Commander.
Protocol: Select the protocol of the ISDN line you are using.
6 Use the V, v, B or b button to select “Next”, then press the PUSH ENTER button.
7 Enter the telephone number of the ISDN used by the system.
When you use one ISDN line, enter the same number both in the A1 and A2 text boxes (except for the USA and Canada).
Area Code | Local Number |
A1
A2
B1
B2
C1
C2
Previous | Next | Cancel |
Area Code: Enter the area code. Do not enter the first “0” number.
Local Number: Enter the telephone number.
When you select Auto SPID (only for customers in the USA and Canada)
You can automatically set up the Area Code and Local Number on this page, and SPID items in the SPID menu.
Notes
•When you select a blank text box and press the PUSH ENTER button on the Remote Commander, the content in the text box immediately above will be copied to the selected text box.
•When you use the
When you use the
8 Use the V, v, B or b button to select “Next”, then press the PUSH ENTER button.
9 Enter the
Only numerals are available for a sub- address.
When you use one ISDN line, enter the same number both in the A1 and A2 text boxes (except for the USA and Canada).
Sub Address
A1
A2
B1
B2
C1
C2
Previous | Next | Cancel |
32 Setting Up the System for the First Time — Initial Setup Wizard