RGB OUT (DSB): Outputs the signal to a monitor (Monitor D in the illustration above) connected to the RGB OUT connector on the Data Solution Box.

Note

When “Dual Monitor” is set to “Off” in the General Setup menu, output to a monitor connected to the VIDEO OUT MONITOR SUB connector is not available.

When connecting the monitor to the RGB OUT connector on the Data Solution Box

The menus may not be displayed. In this case, change the setup of your system as described below.

1Connect your monitor to the RGB OUT connector on the Communication Terminal.

2Set “Dual Monitor” to “Off” and “Monitor Out” to “RGB OUT (DSB)” in the General Setup menu.

3Change the connection of the monitor to the RGB OUT connector on the Data Solution Box.

Outputting the Signal to Two Monitors

This setting is available when “Dual Monitor” is set to “On” in the General Setup menu.

The first monitor for displaying motion pictures is fixed to the monitor connected to the VIDEO OUT MONITOR MAIN connector on the Communication Terminal (Monitor A in the illustration).

Select the output to the second monitor using the “Sub Monitor Out” setting in the General Setup menu.

VIDEO OUT: Outputs the signal to a monitor connected to the VIDEO OUT MONITOR SUB connector (Monitor B) on the Communication Terminal.

RGB OUT: Outputs the signal to a monitor (Monitor C) connected to the RGB OUT connector on the Communication Terminal.

RGB OUT (DSB): Outputs the signal to a monitor (Monitor D) connected to the RGB OUT connector on the Data Solution Box.

Conference Data 5: Chapter

Displaying the Picture on a Projector or Monitor 143