VAIO Digital Studio™ User Guide

Enabling Ethernet

Your computer comes with a preinstalled Ethernet interface. To enable faster startup, your computer may ship with this function disabled. You can enable Ethernet connectivity by following the instructions below.

Warning: Your computer has a protective sticker covering the Ethernet port located on the rear panel. Connect only 10Base-T and 100Base-TX cables to the Ethernet port. Using other cables or a telephone cable may result in an electric current overload and can cause a malfunction, excessive heat or fire in the port. For help on connecting to a network, see your network administrator.

To enable the Ethernet connection

1Click on My Computer icon on the desktop.

2Click on Control Panel, and then click on System.

3Click the Device Manager tab.

4Click on the Network Adapters category, and then select "Realtek RTL8139 (A/B/C/8130) PCI Fast Ethernet NIC."

5Click the Properties button.

6Remove the checkmark from the option "Disable in this hardware profile."

7Click OK.

8Close the Control Panel window.

58

Page 58
Image 58
Sony PCV-RX360DS manual Enabling Ethernet, To enable the Ethernet connection