Controlling Power On/Off Automatically (Timer Function) /Self-diagnosis Function

Power Saving Function

1 In the Timer/Clock menu, press M/m to move the cursor (yellow) to “Auto Shutoff” and press

ENTER.

The following menu appears on the display panel.

T i m e r / C l o c k

S l e e p

 

:

 

O f f

 

C l o c k

S e t

 

 

 

 

C l o c k D i s p l a y :

O f f

 

O n / O f f T i m e r

:

 

O f f

 

A u t o S h u t o f f

: O f f

 

 

 

 

 

 

5 m i n

 

 

 

 

 

 

1 0 m i n

 

 

,

t o

s e l e c t ,

 

p r e s s

ENTER

 

t o

r e t u r n

 

 

 

 

2 Press M/m to select the length of time until the change to power saving mode.

Off: The power saving function does not work.

5min: Changes to the power saving mode after five minutes if there is no input signal.

10min: Changes to the power saving mode after 10 minutes if there is no input signal.

When the power saving mode is on, the unit changes to standby mode.

To cancel the power saving function

Press the 1 switch on the 1 (standby) switch / indicator section or the POWER ON switch on the Remote Commander.

Self-diagnosis Function

The unit has a self-diagnosis function.

This function shows the display’s condition based on the pattern shown by the flashing of the STANDBY indicator. The flashing pattern informs you of the display’s current condition.

If the STANDBY indicator flashes, check the number of flashes and contact your authorized Sony dealer.

1 Check the flashing pattern of the STANDBY indicator.

The indicator flashes (with an image showing on the display) or flashes at intervals of three seconds (with no image showing on the display).

Count the number of flashes if the indicator flashes at intervals of three seconds. For example, the indicator flashes twice, followed by a three second pause, two more flashes and this pattern repeats. In this case, the count for the number of flashes is two.

2 Unplug the unit.

Inform your authorized Sony dealer of the number of flashes.

47 (GB)