Location and Function of Parts and Controls

ql CHROMA button

Adjusts the chroma when the picture mode is set to “User 1-3”. Press this button and then adjust the chroma with the M/m or </, button 9.

w; H SIZE button

Adjusts the horizontal picture size. Press this button and then adjust the horizontal picture size with the M/

mbutton 9.wa V SIZE button

Adjusts the vertical picture size. Press this button and then adjust the vertical picture size with the M/m button 9.

ws CONTRAST +/– buttonAdjusts the contrast when the picture mode is set to “User 1-3”.wd ID MODE (ON/SET/OFF) buttons

Press the ON button to make an index number appear on the screen. Then enter the index number of the display you want to operate using the number buttons qh and press the SET button. After you finish the operation, press the OFF button to return from the ID mode to the normal mode.

For details about the index number, see “Operating a Specific Display With the Remote Commander” on page 48 (GB).

Installing batteriesInsert two size AA (R6) batteries in correct polarity.

Be sure to install the negative <– end first.

eE

e

E

•In normal operation, batteries will last up to half a year. If the Remote Commander does not operate properly, the batteries might be exhausted sooner. Replace them with new ones.

•To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the Remote Commander for a fairly long time.

When the Remote Commander does not work

Check that the STANDBY indicator lights up and the Remote Mode in the Remote menu is not set to Off. The Remote Commander operates the display only when both of the two conditions below are met.

•The display is turned on, or it is in the standby mode.•The Remote Mode in the Remote menu is set to TVor to PJ.

For details about the Remote Mode, see “Remote menu” on page 24 (GB).

12 (GB)