Sony PFM-50C1, PFM-50C1E ENTER, ENTER, ENTER, ENTER, Color Temp, When you select “User1” to “User3”, The menu returns to the Color Temp menu

Adjusting the Picture

Color Temp.

You can also set the color temperature. You can select Cool, Neutral or Warm, or adjust each gain more precisely. Up to three adjusted color temperatures can be registered. You can rename them (up to six characters in length).

1 Select “Color Temp.” with M/m and press

ENTER.

2 Select the color temperature with M/m and press

ENTER.

Cool: to set the color temperature to highNeutral: to set the color temperature to neutralWarm: to set the color temperature to lowUser1 – 3: to set the gain more precisely

When you select Warm, Neutral or Cool, the menu returns to the Adjust Picture menu.

When you select “User1” to “User3”

When you select “User1” to “User3”, the following menu appears on the display panel.

P i c t u r e / S o u n d C o n t r o l

A d j u s t P i c t u r e ( U s e r 1 )

C o l o r T e m p .			:	U s e r 1
R e d	G a i n
G r e e n		G a i n
B l u e		G a i n
N a m e		S e t
,	t	o s e l e c t ,	ENTER ,	t o
s e t

(1)Press M/m to move the cursor (yellow) to the gain item that you want to set and press

ENTER.

The following menu appears on the display panel.

R e d G a i n 0 0

(2)Adjust the gain (0 to 255) with M/m/</, and press ENTER.

The menu returns to the Color Temp. menu.

When you rename the adjusted color temperature, follow the steps below.

(3)Press M/m to move the cursor (yellow) to “Name Set” and press ENTER.

The following menu appears on the display panel.

P i c t u r e / S o u n d C o n t r o l A d j u s t P i c t u r e ( U s e r 1 )

C o l o r T e m p . : U s e r 1 N a m e S e t

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

a b c d e f g h i j k l m n o p q r

s t u v w x y z ( ) [ ] < > + – /

= % & ; :		. ' ,	E n d
, , ,	t	o s e l e c t	, ENTER t o

s e t

Character list

(4)Select a character or symbol in the character list with M/m/</, and press ENTER. The selected character is input. If you make a mistake, select [<] on the screen to backspace the cursor one character, then correct the error.

When [MENU Function] (page 23 (GB)) on the Initial Setup menu has been set to [Return], the M/ m buttons on the Remote Commander move the cursor left and right. To make the M/m buttons move the cursor up and down, set [MENU Function] to [On/Off].

(5)Repeat steps (4) and after you have finished entering the name, select “end” and press

ENTER.

The menu returns to the Color Temp menu.

32 (GB)