Sony PFM-50C1, PFM-50C1E Remote Commander RM-971, 5INPUT1 button, 6INPUT2 button, qk MENU button, 2STANDBY button, Mutes the sound, 4DISPLAY button, 7RGB/YUV button, 8S/VIDEO button

Remote Commander RM-971

1
2	MUTING	DISPLAY	STBY	ON
3
4			POWER
5	INPUT 1	INPUT 2	VIDEO	OPTION	qf
6	1	2		3	qg
	4	5		6	qh
	7	8		9
		0
7	RGB/YUV	S/VIDEO		ASPECT	qj
8				MENU
					qk
9		ENTER
0	BRIGHT			CHROMA	ql
qa	H SHIFT	V SHFT	H SIZE	VSIZE	w;
qs	VOL		CONTRAST		wa

qdws

ON SET OFF

wd

ID MODE

PFM

RM-971

1POWER ON switchPress to turn on the display.2STANDBY buttonPress to turn the display to the standby mode.3MUTING button Mutes the sound.4DISPLAY button

Displays the input signal information and the picture mode at the display panel. Press again to clear it.

If this displayed information is left undisturbed for a short time, it will disappear automatically.

5INPUT1 buttonSelects the signal input from the INPUT1 connectors.6INPUT2 buttonSelects the signal input from the INPUT2 connectors.

Location and Function of Parts and Controls

7RGB/YUV button

Press to select the format matching that of the input signal connected to the INPUT1 or INPUT2 connector. Each press toggles between RGB and YUV.

8S/VIDEO button

Selects the signal input from the COMPOSITE IN connector or Y/C IN connector from among the VIDEO connectors. Each press toggles between COMPOSITE IN and Y/C IN.

9M/m/</,/ENTER buttons

The M/m/</, buttons move the menu cursor (yellow) and set values, etc. Pressing the ENTER button enters the selected menu or set contents.

q; BRIGHT +/– buttonAdjusts the brightness when the picture mode is set to “User 1-3”.Press this button and then adjust the brightness with the M/m or </, button 9.qa V SHIFT button

Adjusts the vertical centering. Press this button and then adjust the vertical centering with the M/mbutton 9.

qs H SHIFT button

Adjusts the horizontal centering. Press this button and then adjust the horizontal centering with the M/m or </, button 9.

qd VOLUME +/– buttonAdjusts the volume.qf OPTION button

Selects the signal input from the optional adaptor (except BKM-B10) when you install it in the unit.

qg VIDEO button

Selects the signal input from the COMPOSITE IN connector or Y/C IN connector from among the VIDEO connectors.

qh Number buttonsPress to enter the index number.qj ASPECT buttonChanges the aspect ratio of the picture (Wide Mode).qk MENU button

Press to make the menu appear. The menu is no longer displayed when this button is pressed again.

When using the MENU button to return to the previous menu level, see “Initial Setup menu” on page 23 (GB).

11 (GB)