Watching the Picture

Watching the Picture

Before you start

•Turn on the display.

•Turn on the connected equipment and play a video source.

•To display the input signal information and Picture Mode on the screen when turning on the power or switching the input signal, set “Display” in the Custom Setup menu to On.

•To select the on-screen language used in the menu, see page 41 (GB).

Switching the Input Signal

1 Press MENU.

The main menu appears on the display panel.

P i c t u r e / S o u n d C o n t r o l

P i c t u r e M o d e : S t a n d a r d

A d j u s t P i c t u r e

A d j u s t S o u n d

,

t

o s

e l

e c t , ENTER ,

t o

e n t e r

a d j .

m e n u

 

2 Press M/m to move the cursor (yellow) to “Input Select” and press ENTER.

Input Select menu appear on the display panel.

I n p u t S e l e c t

I N P U T 1 ( R G B )

I N P U T 1 ( C O M P O N E N T )

I N P U T 2 ( R G B )

I N P U T 2 ( C O M P O N E N T )

V I D E O ( C O M P O S I T E )

V I D E O ( Y / C )

,

t o s

e l e c t , p r e s s ENTER

t o

e x e c u

t e

3 Press M/m to move the cursor (yellow) to the input source to be displayed and press ENTER. INPUT1 (RGB): Selects the audio and video

signal input from the INPUT1 connectors when the input signal is an RGB signal.

INPUT1 (COMPONENT): Selects the audio and video signal input from the INPUT1 connectors when the input signal is a component signal.

INPUT2 (RGB): Selects the audio and video signal input from the INPUT2 connectors when the input signal is an RGB signal.

INPUT2 (COMPONENT): Selects the audio and video signal input from the INPUT2 connectors when the input signal is a component signal.

VIDEO (COMPOSITE): Selects the audio and video signal input from the COMPOSITE IN connector and AUDIO IN jack among the VIDEO connectors.

VIDEO (Y/C): Selects the audio and video signal input from the Y/C IN connector and AUDIO IN jack among the VIDEO connectors.

The selected input signal appears on the display panel.

Color system or horizontal/vertical frequency

Signal type

I N P U T 1 ( R G B ) 1 0 2 4 7 6 8 / 6 0

S t a n d a r d

Picture mode

You can switch the input signal using the Remote Commander supplied with your display panel.

Notes

•We recommend input source video equipment equipped with a TBC (time base corrector). If the display receives a signal without TBC, the picture may disappear due to disturbance of the sync signal.

•If signals of the same format are input from multiple systems, the Picture Quality setting will default to the most recently set value (Only when the signal formats are identical).

26 (GB)