Voice Dialing Tips:
•Wait for the beep before speaking.
•Speak clearly at a normal volume, as if you were talking to someone on the phone.
•When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1.In Standby mode, press and hold 
.
“Say a Command” appears in the display and is pronounced through the earpiece.
2.Say, “Call”.
You are prompted to “Say the name or #”.
3.Speak clearly and say the name of a person in the Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and dials the number.
If Voice Dial is not sure which name you said, it displays a choice list of up to three names and prompts you with “Did you say?” followed by the first name on the list.
4.Say “Yes” to confirm the name or “No” to hear the next name, or use the keypad to select the correct name from the list. (For more information, refer to “Choice Lists” on page 104.)
•Press the Repeat soft key to say the name again.
•Press the Settings soft key, then press the Exit soft key to exit Voice Dial without dialing.
If the recognized name has multiple numbers stored for it (that is, Home, Work, Mobile, and so on), Voice Dial displays the possible choices and prompts you with “Which number?”
5.Say one of the following number types:
•“Home”
•“Work”
•“Mobile”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
Call Functions | 24 |
