Aerial Reception

Settings (Tuner)

You can make tuner and programme position settings for the recorder.

Auto Channel SettingAuto Scan

If you connect a TV to this recorder not using SMARTLINK, you can preset programme positions automatically using “Auto Scan.”

Select your country/region using </,, and press ENTER.

The programme position order will be set according to the country/region you set. If any programme positions are unused or contain unwanted channels, you can disable them (page 102).

Download from TV

If you connect a TV to this recorder with SMARTLINK, you can preset programme positions by downloading from your TV. For details, refer to the operating instructions supplied with your TV. Select your country/region using </,, and press ENTER.

The tuner preset data will be downloaded from your TV to this recorder.

If any programme positions are unused or contain unwanted channels, you can disable them (page 102).

Manual CH Setting

Presets programme positions manually. If some programme positions could not be set using the “Easy Setup” function, you can set them manually.

If there is no sound or if the picture is distorted, the wrong tuner system may have been preset during “Easy Setup.” Set the correct tuner system manually in the steps below.

1Select your country/region using </ ,, and press ENTER.

Programme position

2Press PROG +/– to select the programme position.

3Select the item you want to change using M/m, and change the settings using </ ,, then press ENTER.

•To preset another programme position, repeat from step 2.

Skip

On

Select this when the

 

programme position is unused

 

or contains unwanted

 

programme positions.

 

The selected position will be

 

skipped when you press

 

PROG +/–.

 

 

Off

Does not skip the selected

 

programme position.

 

 

102