Setting external decoder (PAY- TV/Canal Plus analogue decoder) programme positions

To watch or record PAY-TV/Canal Plus analogue programmes, set your recorder to receive the programme positions using the on-screen display.

In order to set the programme positions correctly, be sure to follow all of the steps below.

1 Press SYSTEM MENU.

The System Menu appears.

2 Select “Initial Setup,” and press

ENTER.

3 Select “Video In/Out,” and press

ENTER.

4 Select “LINE 3 Out,” and press

ENTER.

5 Press M/m to select “Video” or “RGB,” and press ENTER.

6 Select “LINE 1 In,” and press ENTER.

7 Press M/m to select “Decoder,” and press ENTER.

8 Press O RETURN to return the cursor to the left column.

9 Select “Tuner,” and press ENTER.10 Select “Manual CH Setting,” and press ENTER.11 Select “Next Screen,” and press

ENTER.

12 Select your country/region, and press

ENTER.

Programme position

13 Select the desired programme position using PROG +/– or number buttons.

14 Select “Channel” using M/m, and select the external decoder programme position using </,.

15 Select “Sound System” using M/m, and select an available TV system, B/ G, D/K, I, or L using </,.

To receive broadcasts in France, select “L.”

16 Select “Decoder” using M/m, and select “On” using </,.

17 Press SYSTEM MENU to exit the menu.

To return to the previous step

Press O RETURN.

bNotes

•If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected decoder.

•To watch the connected external decoder (PAY- TV/Canal Plus analogue decoder) programmes during recording, press the PROGRAM + button on the recorder (“SCART THRU” appears on the front panel display). To return to the previous display, press the PROGRAM – button on the recorder (“SCART NORM” appears on the front panel display). The recorder automatically switches to the programme tuned by the recorder’s tuner after the recording has finished. To watch the connected external decoder (PAY- TV/Canal Plus analogue decoder) programmes while the recorder is in standby mode, set “Power Save” to “Off” (default) in the “Basic” setup (page 101).

30