4.Changing the Name of a Recorded Programme

HDD +RW -RWVR-RWVideo+R

-RVR-RVideo

You can label a DVD, title, or programme by entering characters. You can enter up to 64 characters for a title recorded in the HDD/ DVD-RW/DVD-R (VR mode), 40 characters for a title recorded in the DVD+RW/DVD-RW (Video mode)/ DVD+R/DVD-R (Video mode), but the actual number of characters displayed in the menus such as the Title List will vary. The steps below explain how to change the name of the recorded programme.

TITLE LIST

</M/m/,,

ENTER

. >

m M x

1 Press TITLE LIST.2 Select a title using M/m, and press ,.

The sub-menu appears.

3 Select “Edit” using M/m, and press

ENTER.

4 Select “Title Name” using M/m, and press ENTER.

The display for entering characters appears.

The current name is displayed at the input row.

Input row

5 Move the cursor to the point where you want to insert the character using m/M.

To erase all of the characters, press and hold CLEAR for 2 seconds or more.

6 Select “Upper case” or “Lower case” using ./>.

The characters for the selected type are displayed.

7 Press </M/m/, to select the character you want to enter, and press ENTER.

The selected character appears at the input row.

To insert a space, press X (or select “Space,” and press ENTER).

8 Repeat steps 6 and 7 to enter the remaining characters.

To erase a character, move the cursor to the character at the input row, and press CLEAR (or select “Clear,” and press ENTER).

To insert a character, move the cursor to the right of the point where you want to insert the character. Then select the character, and press ENTER.

To erase all of the characters, press and hold CLEAR for 2 seconds or more.

9 Press x (or select “OK,” and pressENTER).

To cancel the setting, press

ORETURN.

Recorder DVD Your Know to Getting — Operations Basic Seven

37