2Set the Command Mode for the remote so it matches the Command Mode for the recorder you set above.

Follow the steps below to set the Command Mode on the remote.

1 Hold down ENTER.

2 While holding down ENTER, enter the Command Mode code number using the number buttons.

3 Hold down both the number and ENTER buttons at the same time for more than three seconds.

zHint

You can check the Command Mode for the recorder in the front panel display (page 13). When the Command Mode is set to “3 (Default setting),” “1” or “2” does not appear.

SMARTLINK

This Recorder

Allows you to use the

Only

SMARTLINK function

 

with the recorder when the

 

recorder is in standby

 

mode.

 

 

Pass Through

Allows you to use the

 

SMARTLINK function

 

with the connected

 

equipment when the

 

recorder is in standby

 

mode.

 

 

bNote

Set “Power Save” to “Off” in the “Basic” setup (page 101) to set “SMARTLINK” to “Pass Through.”

DivXRegistration Code

Displays the registration code of DivX video files for this recorder.

For more information, go to http://

www.divx.com/vod on the Internet.

Set Preview (HDD only)

Selects the thumbnail type shown in the Title List.

Quick

Plays short excerpts from

Preview

throughout the selected

 

title.

 

 

Normal

Plays the selected title

 

from the beginning.

 

 

116