DubbingYou dubbed a title, but the title did not appear in the HDD Title List.

,The title contained a copy protection signal, so it was moved (page 131).

High-speed dubbing is not possible.

,The title cannot be dubbed at high speed (page 67). Even if A-B erasure is performed so that a title does not contain mixed picture sizes, it is still treated as a title with mixed picture sizes.

HDD/DVD Dubbing is not possible.

,The title cannot be dubbed (page 66).

HDD camcorder dubbing is not possible.

,An HDD camcorder which is not supported by this recorder is connected (page 70).

,The HDD camcorder is not set to the USB connection mode (page 71).

,The HDD camcorder contains only the contents that have already been dubbed to the recorder when you are dubbing using the ONE-TOUCH DUB button or “Incremental Dubbing.”

DisplayThe clock has stopped.

,Set the clock again (page 100).

The clock is wrong.

,Set the clock again (page 100). If you cannot set the clock, wait until the clock data is received and the clock is automatically adjusted.

The timer indicator is flashing.

,The disc does not have enough space.

,Insert a recordable disc into the recorder.

,The inserted DVD is protected (page 38).

The clock does not appear in the front panel display when the recorder is turned off.

,“Front Panel Display” is set to “Off” in the “Options” setup (page 115).

Remote controlThe remote does not function.

,Different command modes are set for the recorder and remote. Set the same command mode (page 115). The default command mode setting for this recorder and the supplied remote is “3 (Default setting).” You can check the current command mode in the front panel display (page 115).

,The batteries are weak.

,The remote is too far from the recorder.

,The remote’s manufacturer code returned to the default setting when you replaced the batteries. Reset the code (page 22).

,The remote is not pointed at the remote sensor on the recorder.

Others

The recorder does not detect a USB device connected to the recorder.

,Make sure that the USB device is securely connected to the recorder (page 117).

,Check if the USB device or a cable is damaged.

,Check if the USB device is on.

,The USB device is connected via a USB hub. Connect the USB device directly to the recorder.

Display language on the screen switches automatically.

,When “Control for HDMI” is set to “On” (default) in the “HDMI Output” setup (page 115), the display language on the screen automatically switches, according to the language setting of the connected TV, if you change the language settings on your TV, etc.

The ‘BRAVIA’ Sync features do not operate.

,Your TV is not compatible with the ‘BRAVIA’ Sync features.

,“Control for HDMI” is set to “Off” in the “HDMI Output” setup (page 115).

,The recorder is connected to the TV via an amplifier. Connect the recorder directly to the TV.

Information Additional

,continued 123