Sony 3-293-880-11(1), RDR-HX680, RDR-HX980 Other Settings (Options), Command Mode, Control for HDMI, On Screen Display, Front Panel Display

bNotes

•The PCM signals may not be output even when you select “Auto” depending on the “Audio Out” settings, number of audio channels, and the HDMI-connected device.

•The “Audio Output” function is not available when a DVI device is connected.

Control for HDMI

On	Allows you to use the
	“Control for HDMI”
	function (page 19).
Off	Turns off the function.

Other Settings (Options)

You can make other operation settings.

On Screen Display

On	Automatically displays
	information on the screen
	when the recorder is turned
	on, etc.
Off	Displays information only
	when DISPLAY is
	pressed.

Front Panel Display

Adjusts the lighting of the front panel display.

On	Bright lighting.
Off	Turns off the lighting when
	the power is off.

Command Mode

Changes the Command Mode of the recorder to avoid interference with your other Sony DVD recorder or player.

1Select a Command Mode (“1,” “2,” or “3 (Default setting)”), and press

ENTER.

bNote

The default command mode setting for this recorder and the supplied remote is “3 (Default setting).”

The remote does not function if different command modes are set for the recorder and remote. Set the same command mode.

Adjustments and Settings

,continued 115