4 Touch IR SETUP in the
The IR SETUP: CATEGORY screen appears.
5 Select the component category (“VCR” for example).
To display other items, use the jog dial, or touch vor V to scroll through the list. The IR SETUP: MAKER CODE screen appears.
6 Select the maker and the command mode for the component (“Sony VTR1” for example).
See “Maker compatibility list” on page 36. The component selected in steps 5 and 6 will be registered at the remote (component) selected in step 2, and the screen for the selected category appears. The IR setting is displayed at the bottom of the screen.
A long beep sound is emitted to indicate that registration was successful. Operation is now possible from the RM SELECT screen.
To stop registration at any time
Touch EXIT or CANCEL during any step.
Notes
•Depending on the maker, certain remote codes may not exist and cannot be operated with the keys (icons) on the screen. These keys are dimmed.
•When registering components made by certain manufacturers, some commands may not function even though they are displayed.
•Depending on the model or the model year, you cannot operate the component even it is listed in the “Maker compatibility list”. In this case, you can use the Learning function to program the commands of the remote supplied with the component (page 25).
Selecting the remote (component)
To operate the registered components, first
display the RM SELECT screen, then select the | Basic | |
| ||
remote (component) you want to operate (CD, |
| |
MD, etc.). | Operations | |
1 Touch RM SELECT. | ||
| ||
The RM SELECT screen appears. |
|
2 Touch the remote (component) you want to operate.
Or, turn the jog dial to select the remote (component), then press the jog dial to enter the selection. The screen for operating the component appears. Touch B or b to display other screens. See the tables on pages
To display other items, use the jog dial, or touch v or Vto scroll through the list.
Tips
•You can change the name of remotes (components) (page 28).
•On the last screen for each remote (component), there are 8 keys specially for use with the Learning function (USER RESERVE KEYS). You can use these keys for programming additional remote codes (page 27).
continued