7 Select the maker (“Sony VTR1” for example).
The COMMAND list appears.
8 Select the command (“POWER” for example).
The items selected in steps 6 to 8 are registered in the box selected in step 5. The macro step number (BOX) list reappears. You can program up to 24 steps.
To operate Sony components
When selecting the category in step 6, you can select the operation such as turning on/off Sony components or switching the input of Sony TVs.
To delay the output of an IR code
Select “WAIT TIME” from the CATEGORY list. The wait time list (“1sec” to “60sec” (1 to 60 seconds)) appears. Select the time you want to wait.
To use learned codes under the Macro Play function
Select “RESERVE KEYS” from the CATEGORY list. Then, select the button for the learned IR code.
To cancel programming
Touch EXIT or CANCEL during any step.
To clear the programmed IR code
Select the macro step number (BOX) you want to clear the IR code, then select “MACRO CLEAR” from the CATEGORY list.
To change the name of the Macro Play
In step 4, touch MACRO NAME EDIT. Touch the name input buttons to enter the name (up to 10 characters), then touch SET. Touch EXIT to
return to the MACRO screen.Advanced Current name display
Name input display 
Operations
Name input buttons
To start Macro Play
1 Touch MACRO.
The MACRO screen appears.
2 Turn the jog dial to select the Macro Play, then press the jog dial to enter the selection.
To cancel the Macro Play during operation, press the jog dial again.
Note
If the Macro Play function does not work properly, try setting a “WAIT TIME” between each command.
continued