Adjusting the commander’s operating environment (continued)
xSelecting the icon size (ICON SIZE)
You can select the icon size of the RM SELECT screen. Touch SMALL to use small icons (12 icons are displayed at a time) or touch LARGE to use large icons (9 icons are displayed at a time).
xSetting the LCD turn off time
(LCDOFFTIME)
The turn off time can be set between 10 and 90 seconds in 1 second intervals. Touch + or – to adjust the turn off time.
Tip
The turn off time is factory set to 60 seconds. To preserve battery life, set to a shorter time.
xAdjusting the position of the touch panel (TOUCHPANEL)
Adjust the position of the LCD when it shifts from the normal operating position.
Touch the center of each of the 4 dots. “Adjusted” appears in a short while and long beep is emitted.
xSetting the warning alarm and the operating beep sound (ALARM/BEEP)
You can set the warning alarm and the operating beep sound on or off. Touch ON to output the sound. Touch OFF to turn off the sound.
xReturning settings to their factory preset settings (ALL CLEAR)
Touch YES to erase all memorized settings and return them to their factory presets. A long beep is emitted and all settings return to the factory settings.
Please note that once erased, settings cannot be returned.
xRegistering the 2 way amplifier/receiver (AMP REGIST)*
When using Sony 2 way amplifier/receiver, touch START to download the amplifier/ receiver information. For details, see page 20.
xSetting the backlight (BACK LIGHT)
You can choose to turn the backlight on manually or to have the commander remember your previous setting.
Set to ONCE (factory setting) if you prefer to turn the backlight on manually as needed. Set to KEEP if you want the commander to remember the previous backlight setting. For example, if the backlight was on the last time the LCD was on, the backlight will automatically come on again the next time the LCD comes on. Likewise, if the backlight was off, it will stay off the next time too.
*When carrying out this operation, make sure that the amplifier/receiver’s power is on, and be sure to point the commander’s transmitter/receiver section toward the display on the amplifier/receiver. Also, operate the commander at a distance of about