Operations for Sony Amplifiers/Receivers
When using Sony amplifiers/receivers, you can operate various functions. Before operating, register the Sony amplifier/receiver (page 10).
When selecting Sony amplifier/receiver from the IR SETUP: MAKER CODE list, be sure to select the appropriate command mode.
About the command mode (IR type)
If the amplifier/receiver’s command mode (IR type) and the commander’s command mode (IR type) do not match, you cannot use the commander to operate the amplifier/receiver.
Tip
To use the multi room function of the amplifier/ receiver, select SONY MULTI ROOM1 (or 2) from the IR SETUP: MAKER CODE list.
Operating the amplifier/receiver1 Touch RM SELECT.
The RM SELECT screen appears.
2 Touch AMP.
The screen for operating the amplifier/ receiver appears.
3 Touch B or b to select the screen.
For details on each screen, see below.
Notes
•Depending on the amplifier/receiver, some commands may not function.
•For details about the operations, refer to the operating instructions supplied with the amplifier/ receiver.
Screen 1/5
This screen is mainly for switching the input and adjusting the volume.
Screen 2/5
This screen is mainly for enjoying surround sound, adjusting the level and balance.
Screen 3/5
This screen is mainly for adjusting the equalizer and outputting the test tone. You can also adjust various settings using the MENU key, cursor keys, and ENTER key. When the amplifier/receiver has ON SCREEN function, it is recommended to adjust the settings using the TV screen.
Screen 4/5
This screen is mainly for setting the display on the amplifier/receiver and selecting the audio input.