Operating the amplifier/
receiver
You can operate a Sony 2 way amplifier/ receiver. You can also download the names of components (functions). Before operating, register the Sony amplifier/receiver using the IR SETUP function (page 10).
When performing the following procedure, be sure to turn on the amplifier/receiver and point the commander towards the IR receptor on the amplifier/receiver.
To register a 2 way amplifier/ receiver
Use the RM SETUP screen.
Note
You cannot register the amplifier/receiver if it is not set to use the 2 way remote system. Refer to “Setting up the 2 way remote” in the operating instructions supplied with the amplifier/receiver.
1 Touch RM SETUP.
2 Touch AMP REGIST.
To operate the amplifier/ receiver
1 Select the Sony amplifier/receiver in the RM SELECT screen.
“1WAY 2WAY” appears.
Tip
When you can select several Sony amplifiers/ receivers in the RM SELECT screen, touch the AMP icon that appears first.
2 Touch 2WAY.
The screen for the 2 way operation appears and you can operate the amplifier/receiver registered in the RM SETUP screen.
3 Touch START.
The communication starts and the amplifier/ receiver is registered to the commander. The registered amplifier/receiver name appears in the screen. The amplifier/receiver name also appears in the RM SETUP screen as the current setting.
Note
If the amplifier/receiver name appears as “model others”, the amplifier/receiver is not registered correctly. In this case, some 2 way operations may not be possible.
To download the names of components (functions), touch INPUT SELECT, then touch INPUT NAME DOWNLOAD.
To download the names of sound fields, touch SOUND FIELD, then touch S.F.
NAME DOWNLOAD.
Notes
•2 way operations may not be possible immediately after turning on the amplifier/receiver.
•You cannot use the jog dial when using the 2WAY screen.
•You cannot use the Learning function for the keys in the 2WAY screen.