Using the Auto Power function
In step 5, link the remote (component) to “AUTO POWER”. For the video components, the following display appears. Select the wait time and the input of the TV.
Select the wait time.
Select the input of the TV.
Notes
•The TV input may not switch automatically on all Sony TVs. This is because some TVs cannot receive remote control codes immediately after being turned on. In this case, set the wait time.
•When you select “TV” as the video input, the TV input does not switch.
To cancel MACRO LINK
Select “OFF” in the MACRO LINK screen.
Learning the commands of
other remote commanders
Setting remote control codes that are not stored in the commander
When a remote control code is not one of the presets stored in the commander, it is possible for the commander to learn the code using the Learning function.
Learning Function can be used for each preset operation keys and USER RESERVE KEYS.
To program an IR code to the preset operation keys
1 Touch RM SELECT.
2 Touch the remote (component) (“MD” for example).
Or, turn the jog dial to select the remote (component), then press the jog dial to enter the selection. The screen for operating the component appears.
3 Touch 
.
The
4 Touch LEARN in the
The commander enters the learning mode.
“LEARN” appears.
continued
Operations Advanced