Sony RM-TP1 Switching the function on the amplifier/receiver automatically (AMP LINK), 28GB, remote (component), Changing the name of the

Touch RM SELECT.

The RM SELECT screen appears.

Switching the function on the amplifier/receiver automatically (AMP LINK)

You can set the commander to switch the function on the amplifier/receiver to the component selected in the RM SELECT screen automatically.

The following procedure uses an example to switch the function on the amplifier/receiver to CD when “CD” is selected in the RM SELECT screen.

1

2 Turn the jog dial to select the remote (component) you want to use with the AMP LINK function (“CD” for example).

When you touch the remote (component), touch B to display the RM SELECT screen.

3 Touch .

The pull-down menu appears.

4 Touch AMP LINK in the pull-down menu.

The AMP LINK screen appears.

5 Select the function you want to switch the function to (“CD” for example).

A check (✔) appears in front of the selected function.

6 Touch EXIT.

The RM SELECT screen reappears.

Aappears in the box of the remote (component) selected in step 2.

To cancel AMP LINK

Select “OFF” in the AMP LINK screen.

Changing the name of the

remote (component)

You can change the name of the remote (component) that appears in the RM SELECT screen (up to 10 characters).

1 Touch RM SELECT.

The RM SELECT screen appears.

28GB