Location of Parts and Controls

This chapter provides information on the location of buttons and how to use them to perform basic operations.

However, some functions explained in this section may not operate depending on the component you are controlling.

Front panel

qa

1

0

2

9

3

4

 

8

5

 

6

7

1BACK LIGHT button

Press to turn the backlight on or off. Hold down for about 2 seconds to turn the LCD off. When the LCD is off, press to turn on the LCD and backlight.

•To prolong use of the battery, the LCD automatically turns off if there is no command entered in the touch panel for 60 seconds.

•To view the LCD display without turning on the backlight, touch the touch panel when both the backlight and LCD are off.

2?/1/SYSTEM STANDBY button*

Normally used to turn the amplifier/receiver on or off.

When pressed more than 2 seconds, it turns off all Sony components (SYSTEM STANDBY) by executing the Macro Play function SYSTEM OFF program (page 22).

3Jog dial

Rotate to scroll through items in a list (etc.). Push to select the highlighted item.

4MUTING button*

Use to mute the sound of the amplifier/ receiver.

5MASTER VOL +/– buttons*

Use to adjust the volume of the amplifier/ receiver.

6Touch panel

Touch to operate. The commander turns on automatically.

7Stereo mini jack

Use to upgrade the firmware in the future.

8TV VOL +/– buttons*

Use to adjust the volume of the TV.

9TV CH +/– buttons*

Use to select the channel of the TV.

0TV INPUT button*

Use to select the input of the TV.

qaSLEEP button*

Use to operate the amplifier/receiver’s sleep timer function. The sleep timer settings appear in the amplifier/receiver’s display, not the commander’s LCD.

*The commander emits the remote code for operating the AMP (amplifier/receiver) or TV that is registered to this commander using the IR SETUP function (page 10).

If you register two or more AMPs or TVs, the commander emits the remote code for the component (icon) that appears first (on the left top side) in the RM SELECT screen.

8GB