Setting Up Your DSS System

Viewing Satellite Programs

Viewing Cable or

Off-Air Programs

Recording Satellite Programs While Watching Cable or Off-Air Programs

1 Turn on the TV, and then set the TV’s line input to the DSS receiver. (For example, set the TV to channel 3 or 4, if you used an RF connection; or set to VIDEO1, etc., if you used an A/V connection.)

2 Turn on the VCR and A/V receiver, if you connected these components. Then set their output switches accordingly.

3 Turn on the DSS receiver and select a station.

Note

The following instructions apply only if you connected your cable TV or terrestrial antenna to your DSS receiver.

1 Turn off your DSS receiver, or press the TV/DSS button to set the DSS receiver to TV mode (DSS indicator on the front panel is off).

2 Turn on the TV and then:

YIf you have a cable box, turn it on and then tune the TV to the output channel of your cable box, usually channel 3 or 4.

YIf you don’t have a cable box, just tune your TV to the station you want to watch.

Note

The following instructions apply only if you connected your cable TV or terrestrial antenna to your DSS receiver.

1 Turn on the TV and then:

YIf you have a cable box, turn it on and then tune the TV to the output channel of your cable box, usually channel 3 or 4.

YIf you don’t have a cable box, tune your TV to the station you want to watch.

2 Turn on the DSS receiver, and tune to the program you want to

record. Then set the VCR to line input, and start recording, according to your VCR’s instruction manual.

3 Press the TV/DSS button to set the DSS receiver to TV (DSS indicator on the front panel is off).

The DSS receiver’s signal is sent to the VCR, while the off-air signal is sent to your TV for you to watch.

Note

For information on using the DSS receiver’s automatic timer, see “Setting Up the Timer” on page 44.

Note

You cannot record one satellite program while watching another satellite program (unless you have a second DSS receiver). When watching a program that is protected by Macrovision, turn the VCR off to ensure a quality picture.

Chapter 3: Connecting Your System 23