1 Bring up the Timer Setup screen, as described on page 44. 2 Check your settings.
YIf you don’t want to make any changes, select OK to return to the System Menu.
YIf you want to change or clear settings, select the numbered button of the timer setting you want to change.
TIMER SETUP
|
| DAY | START | STOP | CH# | STATION | OK | ||
|
|
|
|
|
|
|
|
| |
1' |
| 11/4 SAT | 8:30PM | 10:30PM | 987 | SHOW |
| CANCEL | |
2 |
|
|
| ||||||
| |||||||||
CLEAR | |||||||||
|
|
| |||||||
3 |
|
|
| ||||||
| |||||||||
4 |
|
| HELP | ||||||
|
|
| |||||||
|
|
| |||||||
|
|
|
| ||||||
5 |
|
|
| ||||||
|
|
|
| ||||||
6 |
|
|
| ||||||
|
|
|
| ||||||
7 |
|
|
| ||||||
|
|
|
|
|
|
|
|
| |
3 Change or clear the setting as follows:
YTo change the setting, move the joystick left or right to highlight the item you want to change. Then reset the item by moving the joystick up or down.
YTo clear the setting, select CLEAR.
4 Select OK to save your selections and return to the System Menu.
YAfter the timer is set, the MESSAGE/TIMER indicator on the front panel lights, indicating that the timer has been set.
YTo use the timer to record a PPV program, you must first purchase it in advance of its showing. See “Ordering
YIf locks and limits are set (and the system is locked), check to make sure they do not conflict with the program you’re trying to record.
YAbout 60 seconds before the timer automatically tunes to the specified channel, a message appears. To cancel the timer setting and continue watching the current program, press the EXIT button.
YIf you set overlapping (conflicting) timer settings, the DSS receiver handles these timer settings as follows:
Y If you set two timer settings to start at the same time, the timer setting that’s listed first has priority over any other conflicting timer settings. Conflicting timer settings are automatically cleared from the Timer Setup screen when the first timer setting is activated.
Y If you set a second timer setting to start before the first timer setting is set to stop, the second timer setting will start before the first timer setting stops.