Precautions
On Safety
On Power Sources
On Placement
On Cleaning
On Repacking
YIf you spill or drop anything into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further.
YOperate the receiver only on 120 V AC.
YFor detailed safety precautions, see the “Important Safeguards” leaflet that came with the receiver.
YThe receiver continues to draw power from the AC power source as long as it is connected to the wall outlet, even if the receiver itself has been turned off.
YIf you are not going to use the receiver for a long time, be sure to disconnect the receiver from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord.
YOne blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer.
YIf the AC power cord gets damaged and needs to be replaced, have it done at a qualified service shop only.
YPlace the receiver in a location with adequate ventilation to prevent heat
YDo not place the receiver in a location where it will be exposed to extreme hot or cold temperatures. Avoid direct sunlight and do not place near heat sources.
YDo not place the receiver in a location subject to excessive dust or mechanical vibration. Protect from vibration at all times.
YDo not place anything on top of the receiver, which might block the ventilation holes and cause malfunctions.
YBefore connecting other components, be sure to turn off and unplug the receiver.
YClean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.
YKeep the original cartons and packing materials to safely transport the equipment in the future.