Sony SCPH-50011 Servicing Lightning, Damage requiring service, Replacement parts, Safety check

–Never place the console in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

–Do not place the console near or over a radiator or heat register, or where it is exposed to direct sunlight.

–If liquid has been spilled or objects have fallen onto the console.

–If the console has been exposed to rain or water.

7

US

Getting started

ANTENNAS

Outdoor antenna grounding – If an outdoor antenna or cable system is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna- discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Antenna lead-in wire

Ground clamp

Antenna discharge unit (NEC Section 810-20)

Electric service equipment

Ground clamps

Grounding conductors (NEC Section 810-21)

Power service grounding electrode system

(NEC Art 250, Part H)

NEC- National Electrical Code

–If the console has been subject to excessive physical shock by being dropped, or the console exterior has been damaged.

–If the console does not operate normally when following the instruction manual. Adjust only those controls that are specified in the instruction manual. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the console to normal operation.

–When the console exhibits a distinct change in performance – this indicates a need for service.

Servicing

Lightning

For added protection of this console during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet, and disconnect the antenna or cable system. This will prevent damage to the console due to lightning and power-line surges. Do not touch the console during a lightning storm as this may expose you to the risk of electrical shock.

SERVICE

Damage requiring service

Unplug the console from the wall outlet and refer servicing to	FRAYED OR TAUT AC power cord
qualified service personnel under the following conditions:
– When the AC power cord or plug is damaged or frayed.
	CRACKED PLUG

Do not attempt to service the console yourself, as removing the exterior casing may expose you to dangerous voltage or other hazards.

Refer all servicing to an authorized service center. Call

01-800-759-7669 or 5002-9819 to receive instructions on obtaining repair/replacement services.

Replacement parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety check

Upon completion of any service or repairs to the console, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the unit is in safe operating condition.