Sony SCPH-50011 instruction manual If you forget your password, Setting sound options Audio Setup

To change your password

1 In step 2 under “Setting Parental Control” use the directional buttons to select “Change Password”, and press the ✕ button.

The screen for changing the password is displayed.

2 Use the directional buttons to select a number, and press the ✕ button.

Repeat this step to enter a four-digit password. To confirm your password, enter it once again. The password is changed.

Playing a disc which is restricted by Parental Control

1 Insert the disc.

Playback begins automatically, and at the point where Parental Control is set, the screen changes to a display requesting confirmation to temporarily change the Parental Control level.

2 Use the directional buttons to select “Yes”, and press the ✕ button.

The screen for confirming the password is displayed.

3 Use the directional buttons to select a number, and press the ✕ button. Repeat this procedure to enter the four-digit password.

Playback begins.

When DVD playback is stopped, the Parental Control level returns to the original setting.

If you forget your password

1 Press the SELECT button when the screen for confirming the password is displayed.

The screen for deleting the password is displayed.

2 Use the directional buttons to select a number, and press the ✕ button.

Repeat this procedure to enter the four-digit number “7444”. The current password is deleted and the screen for registering a new password is displayed.

3 Follow step 2 in “Setting Parental Control”, to register a new password.

Notes

•If you play a DVD that does not have the Parental Control function, playback will not be restricted even if you set a playback restriction level on your console.

•If you do not set a password, you cannot change the Parental Control settings.

•Some DVDs may require you to enter only the password without changing the Parental Control level.

•Program Play, Shuffle Play, Repeat Play, and A-B Repeat may not be available on some DVDs with the Parental Control feature.

To clear Parental Control

With DVD playback stopped, go to step 6 in “Setting Parental Control” and set “Level” to “Off”.

This setting cannot be cleared during Resume Play.

Setting sound options (Audio Setup)

You can adjust your audio settings based on the playback conditions or the equipment in use.

The default setting for each menu is underlined in the explanations below. For details see “Using the Setup display” on page 23.

Select the (Audio Setup) icon in the Setup display.

xAudio Digital Out

You can switch the methods of outputting audio signal when you connect the following audio devices to the DIGITAL OUT (OPTICAL) connector on the PlayStation®2 console rear using an optical digital cable (sold separately).

•A digital device such as a receiver (amplifier) with a digital connector.

•An audio device with a built-in Dolby Digital or DTS decoder.

•A DAT (Digital Audio Tape) or MD (MiniDisc) deck. For connection details, see page 10.

x DIGITAL OUT (OPTICAL)

Selects whether to output signal through the DIGITAL OUT (OPTICAL) connector.

•On: Select this when you connect with an optical digital cable (sold separately). Normally select this option.

If you select “On”, make the appropriate settings for “Dolby Digital” and “DTS”.

•Off: Select this when you do not want sound (audio signal) to be output through the DIGITAL OUT (OPTICAL) connector.

Note

If you select “Off”, you cannot set “Dolby Digital” or “DTS”.

27

x Dolby Digital	US
Selects the Dolby Digital signal to be output
	DVD
through the DIGITAL OUT (OPTICAL)
connector.	videos
• On: Select this option when the console is
connected to an audio device with a built-in
Dolby Digital decoder.
If the console is connected to an audio device
without a built-in Dolby Digital decoder, do
not turn this option on. If you select this
option by mistake, when you play a Dolby
Digital audio track, a loud noise (or no
sound) will come out from the speakers,
possibly hurting your ears or damaging the
speakers.
• Off: Select this option when the console is
connected to an audio device without a built-
in Dolby Digital decoder.
x DTS
Selects the DTS signal to be output through the
DIGITAL OUT (OPTICAL) connector when
you connect to the console with an optical
digital cable (sold separately).
This setting is not available during Resume
Play.

•On: Select this option when the console is connected to an audio device with a built-in DTS decoder.

If the console is connected to an audio device without a built-in DTS decoder, do not turn this option on. If you select this option by mistake, when you play a DTS audio track, a loud noise (or no sound) will come out from the speakers, possibly hurting your ears or damaging the speakers.

•Off: Select this option when the console is connected to an audio device without a built- in DTS decoder.