Touch DIRECT.
You can also use the FM/AM button on the receiver.
3 Select “DIRECT TUNING” from the SUB menu.
4 Select the numbers for the frequency using the NUM menu.
Example 1: FM 102.50 MHz
Select “FM/AM” from the SUB menu to select the FM or AM band.
2
STR-DA4ES
Use the supplied remote RM-LP211.
1 Select “TUNER” from the FUNCTION list to switch the function to TUNER. You can also use the FUNCTION control on the receiver.

Direct tuning

Enter a frequency of the station directly by using the remote.

For details on the supplied remote, refer to the operating instructions supplied with the remote.

STR-DA7ES

Use the supplied remote RM-TP1.

1 Touch RM SELECT.

The RM SELECT screen appears.

2 Touch AMP.

The screen for operiting the receiver appears.

3 Touch TUNER.

The receiver swiches to the TUNER input.

4 Touch B to return to the RM SELECT screen.

5 Touch TUNER in the RM SELECT screen.

6 Touch FM/AM to select the FM or AM band.

You can also use the FM/AM button on the receiver.

7 Touch b to display screen 2/3.

8

9 Touch the numeric buttons to enter the frequency.

Example 1: FM 102.50 MHz

Touch 1 b 0 b 2 b 5 b 0

Example 2: AM 1,350 kHz

(You don’t have to enter the last “0” when the tuning scale is set to 10 kHz.)

Touch 1 b 3 b 5 b 0

If you’ve tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.

Press 1 b 0 b 2 b 5 b 0

Example 2: AM 1,350 kHz

(You don’t have to enter the last “0” when the tuning scale is set to 10 kHz.)

Press 1 b 3 b 5 b 0

If you’ve tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.

If you cannot tune in a station and the entered numbers flash

Make sure you’ve entered the right frequency. If not, repeat steps 3 and 4. If the entered numbers still flash, the frequency is not used in your area.

Operation Amplifier/Tuner

29GB