x3rd room operation

Main room

3rd room

Audio/Video components

SpeakerSpeaker

3RD

ROOM OUT

Amplifier

STR-DA7ES

IR repeater

IR repeater

(not supplied)

(not supplied)

n N

X x

. >

m M

– +

+

+

RM-US105A

Using an optional IR repeater as shown above

The following operations are possible with the RM-US105A remote:

Switching the output source for the 3RD ROOM OUT jacks.

Adjusting the volume from the 3RD ROOM OUT jacks.

Switching the output to the 3RD ROOM OUT jacks on or off.

Set the command mode of the RM-US105A remote to the 3RD ROOM mode.

1 Press USE MODE momentarily.

The current command mode button slowly lights up 5 times.

2 While the button blinks, press AV SYSTEM 1 or AV SYSTEM 2 according to the command mode of the reciever in the main room.

3 Press USE MODE momentarily again.

4 Press 3RD ROOM while the button blinks.

The command mode has been set to the 3rd room mode.

Tip

Once steps 1 and 2 are done, the setting is stored in the remote’s memory. However, when you change the command mode of the receiver, perform steps 1 to 4 again.

continued

Using Operations Remote the DA7ES-(STR only)

69GB