Listening to the sound in another room (continued)
x2nd room operation
Main room | 2nd room |
Monitor
Audio/Video components
SpeakerSpeaker
2ND
ROOM OUT
Amplifier
IR repeater | IR repeater |
(not supplied) | (not supplied) |
n N
X x
. >
m M
– +
+
+
–
–
Using an optional IR repeater as shown above
The following operations are possible with the
•Switching the output source for the 2ND ROOM OUT jacks.
•Adjusting the volume from the 2ND ROOM OUT jacks.
•Switching the output to the 2ND ROOM OUT jacks on or off.
Set the command mode of the
1 Press USE MODE momentarily.
The current command mode button slowly lights up 5 times.
2 While the button blinks, press AV SYSTEM 1 or AV SYSTEM 2 according to the command mode of the reciever in the main room.
3
4
Press USE MODE momentarily again.
Press 2ND ROOM while the button blinks.
The command mode has been set to the 2nd room mode.
Tip
Once steps 1 and 2 are done, the setting is stored in the remote’s memory. However, when you change the command mode of the receiver, perform steps 1 to 4 again.