Rotate FUNCTION to switch the function to TUNER.
Presetting radio stations

You can preset up to 30 FM or AM stations. Then you can easily tune in the stations you often listen to.

Presetting radio stations

1

2 Tune in the station that you want to preset using Automatic Tuning (page 28) or Direct Tuning (page 29).

3 Press MEMORY.

“MEMORY” appears in the display for a few seconds. Do steps 4 to 5 before the display goes out.

4 Press PRESET TUNING + or – to select a preset number.

If “MEMORY” goes out before you select the preset number, start again from step 3.

5 Press MEMORY again.

The station is stored to the selected preset number.

If “MEMORY” goes out before you press MEMORY, start again from step 3.

6 Repeat steps 2 to 5 to preset another station.

Tuning to preset stations

Using the receiver

1Rotate FUNCTION to switch the function to

TUNER.

The last received station is tuned in.

2Press PRESET TUNING + or – repeatedly to select the preset station you want.

Each time you press the button, you can select the preset station as follows:

nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N

nC0˜...C2˜C1N

Using the remote

STR-DA7ES

Use the supplied remote RM-TP1.

1Touch RM SELECT.

The RM SELECT screen appears.

2Touch AMP.

The screen for operiting the receiver appears.

3Touch TUNER.

The receiver swiches to the TUNER input.

4Touch B to return to the RM SELECT screen.

5Touch TUNER in the RM SELECT screen.

6Touch SHIFT repeatedly to select A, B or C.

7Touch PRESET +/– repeatedly to select the preset station you want.

You can also select the preset stations directly. Do the following after step 5 (above).

1 Touch b to the display screen 2/3.

2 Touch A, B, or C.

3 Touch the numeric buttons to enter the preset number.

STR-DA4ES

Use the supplied remote RM-LP211.

1Select “TUNER” from the FUNCTION list to switch the function to TUNER.

2Move the easy scroll key to select the preset number you want, then press the key to enter the selection.

30GB