Operations Using the Remote (STR-DA7ES only)

For STR-DA7ES, two remotes are supplied (RM-TP1 and RM-US105A). For details on RM-TP1, refer to the separate operating instructions. For details on RM-US105A, refer to the following pages.

Using the remote RM-US105A

When using as a simplified remote

This remote can be used as a simplified substitute of the supplied remote (RM-US105A). The following operations are possible:

•Adjusting the volume.

•Switching the power on or off.

•Switching sources.

•Controlling each component.

•Selecting a sound field.

When using this remote, the command mode of the remote and the receiver should be the same. As the default setting of the command mode of the receiver is “AV SYSTEM 2” and the default setting of the command mode of the remote is “AV SYSTEM 1”, set the command mode of the remote to “AV SYSTEM 2”.

Setting the command mode

1 Press USE MODE momentarily with the tip of a pen, etc.

The current command mode button slowly lights up 5 times.

2 Press AV SYSTEM 2 while the button blinks.

The AV SYSTEM 2 button lights up twice and the command mode changes.

Tip

When the command mode of the receiver is set to “AV SYSTEM 1”, press AV SYSTEM 1 instead of AV SYSTEM 2 in step 2 above.

Note

If the USE MODE indicator remains lit or blinks quickly, start over from step 1.

Audio/Video components

STR-DA7ES

nN

X x

. >

m M

– +

+

+

–

–

66GB

RM-US105A