5: Setting up the speakers

You can use the SPEAKER SETUP menu to set the size and distance of the speakers connected to this system.

1 Press ?/1 to turn on the receiver.2 Press MAIN MENU repeatedly to select “SP SETUP”.3 Turn MENU to select the parameter you want to adjust.

For details, see “SPEAKER SETUP menu parameters” below.

Note

Some speaker setup items may appear dimmed in the display. This means that they have been adjusted automatically due to other speaker settings or may not be adjustable.

4 Turn –/+ to select the setting you want.

The setting is entered automatically.

Note

Press MEMORY/ENTER if you select the setting for “SP PAT. X –X”.

5 Repeat steps 3 and 4 until you have set all of the items that follow.SPEAKER SETUP menu parameters

The initial settings are underlined.

xXXXX SET (Speaker easy setup)

•EASY

If you want to set up your speakers automatically, select “EASY SET”. You can select a pre-defined speaker pattern (see the supplied “Easy Setup Guide”).

•NORM.

If you want to adjust the settings of each speaker manually, select “NORM. SET”.

xSP PAT. X –X (Speaker setup pattern)

When “EASY SET” is selected, you can select

 

the speaker setup pattern. Turn –/+ to select the

Getting

speaker setup pattern and press MEMORY/

 

ENTER to enter the selection. Check your

 

speaker pattern using the supplied “Easy Setup

Started

Guide”.

 

x SW S.W. XXX (Sub woofer selection)

 

•

YES

 

 

If you connect a sub woofer, select “YES”.

 

•

NO

 

 

If you did not connect a sub woofer, select

 

“NO”. The front speakers are automatically set to “LARGE” and you cannot change this setting. This activates the bass redirection circuitry and outputs the LFE signals from other speakers.

Note

In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend that you set the cut off frequency on the sub woofer as high as possible.

x L R XXXXX (Front speakers size)

•LARGE

If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”. Normally, select “LARGE”.

•SMALL

If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to “SMALL”, the center, surround and surround back speakers are also automatically set to “SMALL” (unless previously set to “NO”).

continued

19GB