Before you can receive DAB stations
— DAB INITIAL SCAN
Before you can receive DAB stations, you must register the contents of broadcast (service components) so that they can be received by the DAB tuner using the DAB Initialization Scan procedure.
1 Turn INPUT SELECTOR to select the DAB input.
2 Press MAIN MENU repeatedly to select “TUNER”.
3 Turn MENU to select “DAB SCAN”.
4 Press MEMORY/ENTER.
“SCAN ON” appears in the display and the receiver scans and stores all the DAB broadcasting contents and registers them in the DAB tuner.
When done, “FINISH” appears in the display momentarily and the receiver returns to the normal operation.
Notes
•If you have not registered the contents of broadcast (service components) before you turn INPUT SELECTOR to select the DAB input, “DAB TUNE” appears in the display for a while, then “DAB
_ _ _ _” appears. “PLEASE RUN DAB SCAN FOR DAB STATION” will then scroll across the display. In this case, do the DAB INITIAL SCAN procedure (page 27).
•Do not press any button on the receiver or supplied remote during DAB INITIAL SCAN, except ?/1.
•If you move to another area, repeat this procedure to store stations in your new area.
•This procedure does not create any presets.
•This procedure clears all previously stored presets.
•For details on presets, see “Presetting radio stations” on page 28.
Automatic tuning
1 Turn INPUT SELECTOR to select the DAB band.
The last received station is tuned in. When selecting DAB, “DAB TUNE” will appear in the display while the receiver is collecting DAB data. Please wait until this message disappears.
2 Press TUNING + or TUNING – to select the DAB station you want.
Notes
•When tuning in a DAB station, it may take a few seconds before you hear any sound.
•Before you can receive DAB stations, you must complete the DAB INITIAL SCAN procedure (page 27).
•Preset your favourite DAB stations so that you can use the supplied remote to tune to the stations you want. For details, refer “Presetting radio stations” (page 28).
Operation Amplifier