Specifications
Amplifier sectionPower Output
Models of area code CEL, CEK Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
100 W + 100 W1)
(8 ohms 1 kHz, THD 0.7%)
| 110 W + 110 W1) | |
(8 ohms 1 kHz, THD 10%) | 135 W + 135 W1) | |
Reference Power Output1) | ||
| ||
(8 ohms 20 Hz – 20 kHz, THD 0.09%) | ||
FRONT2): | 100 W/ch | |
CENTER2): | 100 W | |
SURR2): | 100 W/ch | |
SURR BACK2): | 100 W/ch | |
(8 ohms 1 kHz, THD 0.7%) | ||
FRONT2): | 110 W/ch | |
CENTER2): | 110 W | |
SURR2): | 110 W/ch | |
SURR BACK2): | 110 W/ch | |
(8 ohms 1 kHz, THD 10%) |
| |
FRONT2): | 135 W/ch | |
CENTER2): | 135 W | |
SURR2): | 135 W/ch | |
SURR BACK2): | 135 W/ch | |
1) Measured under the following conditions:
Area code | Power requirements |
CEL, CEK | 230 V AC, 50 Hz |
|
|
2)Depending on the sound field settings and the source, there may be no sound output.
Frequency response
PHONO | RIAA equalization curve |
| ±0.5 dB |
|
|
MULTI CH IN, | 10 Hz – 100 kHz |
CD, MD/TAPE, DVD, | |
TV/SAT, VIDEO 1, 2, 3 | ANALOG DIRECT is |
| selected) |
|
|
Inputs (Analog)
PHONO | Sensitivity: 2.5 mV |
| Impedance: 50 k ohms |
| S/N3): 86 dB |
| (A, 2.5 mV4)) |
MULTI CH IN, | Sensitivity: 150 mV |
CD, MD/TAPE, DVD, | Impedance: 50 k ohms |
TV/SAT, VIDEO 1, 2, 3 | S/N3): 96 dB |
| (A, 150 mV4)) |
3)INPUT SHORT.
4)Weighted network, input level.
Inputs (Digital)
DVD, | Sensitivity: – |
(Coaxial) | Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
DVD, TV/SAT, | Sensitivity: – |
MD/TAPE, VIDEO 3 | Impedance: – |
(Optical) | S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
Outputs (Analog) |
|
|
|
MD/TAPE (OUT), | Voltage: 150 mV |
VIDEO 1, 2 | Impedance: 2.2 k ohms |
(AUDIO OUT) |
|
|
|
SUB WOOFER | Voltage: 2 V |
| Impedance: 1 k ohm |
|
|
Outputs (Digital) |
|
|
|
MD/TAPE (Optical) | Sensitivity: – |
|
|
Equalizer |
|
|
|
Gain levels | ±10 dB, 1 dB step |
|
|