Amplifier Operation

Selecting the component

1 Turn INPUT SELECTOR to select the input.

The selected input appears in the display.

To select the

Display

VCR

VIDEO 1 or

 

VIDEO 2

 

 

Video game player

VIDEO 3

 

 

DVD player

DVD

 

 

Satellite tuner

TV/SAT

 

 

MD or tape deck

MD/TAPE

 

 

Super Audio CD or CD

SA-CD/CD

player

 

 

 

Built-in tuner (FM)

FM frequency

 

 

Built-in tuner (AM)

AM frequency

 

 

Built-in tuner (DAB)

DAB service

 

component label*

 

 

Turntable

PHONO

 

 

*If you have not registered the contents of broadcast (service components) before you turn INPUT SELECTOR to select the DAB input, “DAB TUNE” appears in the display for a while, then “DAB _ _ _ _” appears.

“PLEASE RUN DAB SCAN FOR DAB STATION” will then scroll across the display. In this case, do the DAB INITIAL SCAN procedure (page 27).

2 Turn on the component and start playback.

Note

If you select any video components, set the TV’s video input to match the component you selected.

3 Turn MASTER VOLUME –/+ to adjust the volume.

Note

To avoid damaging your speakers, make sure that you turn down the volume before you turn off the receiver.

To mute the sound

Press MUTING on the remote.

The muting function will be canceled when you do the following.

Press MUTING on the remote again.

Turn the power off.

Increase the volume.

To use the headphones

Connect the headphones to the PHONES jack.

When the headphones are connected, speaker output is automatically canceled and “SP A” and “SP B” do not light up in the display.

When the headphones are connected, you can select only the following sound fields (page 38).

HP 2CH (HEADPHONE 2CH)

HP DIR (HEADPHONE DIRECT)

HP MULTI (HEADPHONE MULTI)

HP THEA (HEADPHONE THEATER)

24GB