System Speaker the Up Setting and Up Hooking
Before You Use Your Receiver
There’s no sound from a specific component.
/Check that the component is connected correctly to the audio input jacks for that component.
/Check that the cord(s) used for the connection is (are) inserted fully into the jacks on both the receiver and the component.
No sound is heard from one of the front speakers.
/Check that the BALANCE control is set at center position (see “6 BALANCE control” on page 21).
/Connect a pair of headphones to the PHONES jack and set the SPEAKERS selector to OFF to verify that sound output is from the headphones (see “8 SPEAKERS selector” and “PHONES jack” on page 21). If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection for the front speaker from which no sound is output.
/If only one channel is output from the conncted headphones, the component and the receiver may not be connected correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component.
If you encounter a problem that is not included above, see “Troubleshooting” on page 37.
18