Customizing Sound Fields

By adjusting some of the sound parameters, you can customize sound fields to suit your particular listening situation.

Once you customize a sound field, the changes are stored in memory indefinitely (unless the receiver is unplugged for about one week). You can change a customized sound field any time by making new adjustments to the parameters.

See the table on page 28 for adjustable parameters for each sound field.

To get the most from Dolby Pro Logic

Surround sound

Do the procedures “Selecting the center mode” and “Adjusting the speaker volume” on page 16 before you customize a sound field.

Changing the delay time (DELAY)

You can enhance the Dolby Pro Logic Surround sound even more by delaying the sound output from the rear speakers (delay time). You can select a delay time of 15, 20, or 30 ms. Set a short delay time when the rear speakers are located in a large room or far from where you are listening.

1Start playing a program source encoded with Dolby Surround sound.

2Press CURSOR MODE repeatedly until the SURROUND indicator lights up.

3 Use the cursor buttons ( / ) to select “DELAY xxms.”

The current delay time appears in the display.

4 Use the cursor buttons ( / ) to change the delay time.

Changing the level of effect (EFFECT)

You can specify the amount of the surround effect (i.e., its overall presence) in six levels.

1Press CURSOR MODE repeatedly until the SURROUND indicator lights up.

2 Use the cursor buttons ( / ) to select “EFFECT.”

The current effect level appears in the display.

3 Use the cursor buttons ( / ) to change the effect level.

Adjusting the volume of the rear and

center speakers (REAR/CENTER)

If you feel the volume of the rear or center speaker is inadequate (even after adjusting the speaker volume for Dolby Pro Logic Surround), do the procedure below to adjust the volume.

Note that the speaker volume adjustment is applied to all sound fields.

1Press CURSOR MODE repeatedly until the SURROUND indicator lights up.

2

Use the cursor buttons (

/

) to select “REAR

 

xxdB” or “CENTER xxdB.”

 

 

3

Use the cursor buttons (

/

) to adjust the

 

speaker volume.

 

 

You can select a volume level of –15 dB to +10 dB in 1- dB steps.

Adjusting the tone (BASS/TREBLE)

Adjust the tone (bass or treble) of the front speakers for optimum sound. You can adjust the tone for each separate sound field.

1Press CURSOR MODE repeatedly until the BASS/ TREBLE indicator lights up.

2

Use the cursor buttons (

/

) to select “BASS

 

xxdB” or “TREBLE xxdB.”

 

 

3

Use the cursor buttons (

/

) to adjust the tone

 

level.

 

 

You can select a tone level of –10 dB to +10 dB in 2-dB steps.

4Press TONE ON/OFF so that the TONE indicator lights up.

zYou can turn off the tone adjustments without erasing them

The tone adjustments are stored separately for each sound field. Press the TONE ON/OFF button to turn the TONE indicator off.

Resetting customized sound fields to the

factory settings

1If the power is on, press 1/uto turn off the power.

2Hold down SOUND FIELD ON/OFF and press 1/u.

“SUR CLEAR” appears in the display and all sound fields are reset at once.

Sound Surround Enjoying

27