Adjustments Using the SET UP Button

The SET UP button allows you to make following adjustments.

Adjusting the brightness of the display

1Press SET UP repeatedly until “DSPL SET UP” appears in the display.

2

Press the cursor buttons (

/

) to select

 

“DIMMER.”

 

 

3

Press the cursor buttons (

/

) to select the

 

brightness level.

 

 

You can select any of four brightness levels.

Increasing the output level of the rear

speakers by 5 dB

1Press SET UP repeatedly until “REAR GAIN” appears in the display.

2 Press the cursor buttons ( / ) to select “GAIN UP.”

To restore the normal output level

Repeat the procedure above, selecting “GAIN NORM” in Step 2.

Operations Other

Displaying the operating status of the component connected to the S-LINK CTRL

A1 jack (STR-DE625 (USA, Canada, and Australia) only)

1Press SET UP repeatedly until “DSPL SET UP” appears in the display.

2 Press the cursor buttons (

/

) until “CTRL.A1”

 

appears in the display.

 

 

3 Press the cursor buttons (

/

) to select the

 

setting.

 

 

 

 

 

 

 

To

 

Select

 

 

 

 

Display “PLAY,” “STOP,” “PAUSE,”

ON

 

“REC,” or the contents of a disc or track

 

memo of a CD or MD for about 8 seconds

 

each time you change the operation mode

 

 

 

 

Turn off the operation status display

OFF

 

 

 

 

Notes

•This setting is effective only when the receiver is set to TAPE/ MD, VIDEO 2, or CD (see page 20). For VIDEO 2, the CD changer command mode must be “CD 2” and the CD changer must be connected to the VIDEO 2 jacks on the receiver. For CD, the CD changer command mode must be “CD 1” and the CD changer must be connected to the CD jacks on the receiver.

•If the disc or track memo contains a character that the receiver cannot display, “.” appears for that character.

•When the Mega Control function of the CD player is active, the operating status of the main player is displayed.

36