Hooking Up the Components

This chapter describes how to connect various audio and video components to the receiver. Be sure to read the sections for the components that you have before you actually connect them to the receiver.

Unpacking

Check that you received the following items with the receiver:

•FM wire antenna (1)

•AM loop antenna (1)

•Remote commander (remote) (1)

Model

Remote

STR-DE625

RM-LJ301

 

 

STR-DE525 (except Canada)

RM-U401

 

 

STR-DE525 (Canada)

RM-PP401

 

 

•R6 (size-AA) batteries (2)

•Operating Instructions of the remote

•Audio/video/control S connecting cord (1) (STR-DE625 only)

•Control S connecting cord (1) (STR-DE625 only)

Inserting batteries into the remote

Insert two size-AA (R6) batteries with the + and – properly oriented in the battery compartment. When using the remote, point it at the remote sensor gon the receiver.

For details, refer to the operating instructions supplied with your remote.

zWhen to replace batteries

Under normal conditions, the batteries should last for about 6 months. When the remote no longer operates the receiver, replace both batteries with new ones.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new battery with an old one.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Before you get started

•Turn off the power to all components before making any connections.

•Do not connect the AC power cords until all of the connections are completed.

•Be sure to make connections firmly to avoid hum and noise.

•When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.

4